32
When work has been completed, store the drill by proceeding as follows:
Depressurise the tank of the SR5000 coolant unit (Ref. to
§ 10
), close the tap on the hose and disconnect the
quick-coupling.
Remove the battery from the drill, thoroughly clean it with a dry cloth and place in the appropriate canvas bag
032, also suitable for the storage of the battery charger and the spare battery.
Carefully clean the drill, particularly in the spindle area, removing machining waste (swarf, etc.) and any deposits
of lubrocoolant, then fully withdraw the spindle.
Place the drill, batteries, battery charger and the SR5000 coolant unit in a sealed place free from dust, moisture
and the risk of accidental impact.
The optimum storage temperature of the batteries is between 10 ° C and 30 ° C.
For better protection
Cembre
recommends the use of the VAL P24 or VAL P24-CS (with wheels) plastic cases de-
signed for this purpose, which enable to store the drill blocked by means of the DBG-F2 clamping device and canvas
bags for batteries and battery charger.
Suitable side housings are also provided in this case for storing comon accessories.
rail drill
accessories housing
rail drill
g
cc
ori
housing
accessories housing
accessories housing
accessories housing
15. STORING THE DRILL
Summary of Contents for LD-16B
Page 39: ...39...