21
19
18
11.3) Assembling special spiral bits
Using the spindle lever, position the spindle shaft so that both grub screws (18) become accessible.
If necessary, insert the battery, slide the Motor switch forward to generate successive rotations of the spindle
(indexing function (Ref. to §
5
), making the grub screws (18) visible, then remove the battery.
Insert the spiral bit in the corresponding APED adapter (
1
) and lock it with the grub screw (19) using the 4 mm
T-handle Allen key (
2
) (Ref. to Fig. a).
Unscrew grub screws (18) and insert the bit-adapter unit in the
spindle
(
1
) so that the two engaging dogs on the bit spigot
line up with the grub screws (18) (Ref. to Fig. b).
Grub screws (18) have stops that prevent their complete
unscrewing, do not force them past this stop.
Lock the adapter by fully tightening the screws using the 4 mm
T-handle Allen key (
2
) (Ref. to Fig. b).
APED...
1
2
2
2
1
spindle
DPE
FIG. a
FIG. b
engaging dogs
4 mm T-handle Allen key
4 mm T-handle Allen key
APE.....adapter
DPE spacer
APE
APED
Using APE adapters, it is necessary to insert the DPE
Spacer into the APE to activate the coolant system.
Summary of Contents for LD-16B
Page 39: ...39...