24
11.7) Fitting “double-sided'” templates
Compared to the templates for positioning rail drills, the
KPAF
"double-sided templates" are equipped with a double
profi le that enables positioning of the drill on two diff erent types of rail by simply inverting them.
They are fi xed on the sides of the front plate.
The inserts permit the drill to be positioned on
two types of rail with a specifi c drilling axis.
During
fi tting, ensure that the inserts are facing
the correct side, corresponding to the rail being
drilled.
FIG. b
wing nut + washer
FIG. a
Rotate both inserts to the same
side, suited to the profi le of the rail
being
drilled.
Mount inserts onto the sides of the
drill’s front plate by ensuring that
the pins (S) match the correspond-
ing holes in the inserts (Ref. to Fig. a).
The markings on the two in-
serts should face the same
direction
.
Secure the two inserts by hand (Ref.
to Fig. b) using the wing nuts and
washers supplied in the ACCES-
SORIES KIT of the drill.
front plate
S
Summary of Contents for LD-16B
Page 39: ...39...