9
3).For current measurements up to 2000
µA
DC/AC, set the
function switch to the
mA
position
4).
Press the MODE button to indicate “DC” / “AC” on the
display.
5).Remove power from the circuit under test, then open up
the circuit at the point where you wish to measure current.
6).Touch the black test probe tip to the negative side of the
circuit.
Touch the red test probe tip to the positive side of the circuit.
7).Apply power to the circuit.
8).Read the current in the display
RESISTANCE MEASUREMENT
1).Set the function switch to the Ω position.
2).Insert the black test lead into the negative COM terminal
and the red test lead into the positive Ω terminal.
3).Touch the test probe tips across the circuit or part under
test. It is best to disconnect one side of the part under test so
the rest of the circuit will not interfere with the resistance
reading.
4).Read the resistance in the display
