12
2).Remove the protective rubber holster.
3).Remove the battery cover (two “B” screws) and the
battery.
4).Remove the four “A” screws securing the rear cover.
5).Lift the center circuit board straight up from the connectors
to gain access to the fuse holders.
6).Gently remove the old fuse and install the new fuse into the
holder.
7).Always use a fuse of the proper size and value (0.2A/250V
fast blow for the 200mA range).
8).Align the center board with the connectors and gently
press into place.
9).Replace and secure the rear cover, battery and battery
cover.
WARNING
: To avoid electric shock, disconnect the test leads
from any source of voltage before removing the fuse cover.
5. BATTERY REPLACEMENT
1).
Both for the transmitter or receiver,when the “Low
battery indicator” is lit,it is necessary to replace the
battery.Measur-
Ements may still be made several hours after the low
battery indicator
