8
4.3 Voltage check:
“V check” button to down use receiver
of 2Croc clips.B
lack alligator connect the “COM”reference
other red alligator connect the cable port .if Two digit blue
LED display is “ UU ” prove cable have voltage .only check
is
mainly voltage.
CAUTION: Check voltage range at 5V to 16V DC
4.4 Digital Multimeter test
AC/DC VOLTAGE MEASUREMENTS
1).Insert the black test lead into the negative COM terminal
and the red test lead into the positive V terminal.
2).Set the function switch to VAC or VDC position.
3).Connect the test leads in parallel to the circuit under test.
4).Read the voltage measurement on the LCD display.
CAUTION:
Do not measure AC/ DC voltages if a motor
on the circuit is being switched ON or OFF. Large voltage
surges may occur that can damage the meter.
AC/DC CURRENT MEASUREMENTS
1).Set the function switch to the
µA/mA
position.
2).Insert the black test lead into the negative COM terminal
and the red test lead into the positive
µA/mA
terminal.
