5.Powering Instrument
Before beginning to operate the instrument, a power source
is necessary for it to turn on. Installing Battery
The LCR meter use battery to provide power to the instrument
so that it can be portable. It use six standard 1.5V size batteries.
Place the meter upside down. Open up the back-flip stand, and
locate the screw that tightens the battery compartment cover.
Use a screwdriver to unscrew and remove the cover.
Insert six 1.5V batteries into compartment. Note the positive
(+) and negative (-) terminals as indicated inside the battery
compartment. Be sure to insert the battery with matching
polarity.
Place the battery compartment cover piece. Place screw at the
bottom of the cover piece and tighten down with a screw driver.
Push and hold down the
button for 2 seconds to turn on
the instrument.
The LCR meter has a battery indicator
to notify the user
when to replace battery. When it displays
,the battery
voltage is below normal working voltage. In this case,accuracy
of the meter will also decrease. It is recommended that the
battery be replaced as soon as possible before continuing
operation.See "Installing Battery" for instructions.
5-1 Installing Battery
2 Low Battery Indication
•
•
•
•
5-
8
Dual Display LCR Meter Instruction Manual
Summary of Contents for DT-9935
Page 1: ......
Page 24: ...Dual Display LCR Meter Instruction Manual Rev 110525 ...
