4
2.Safety Guidelines
This meter is for indoor use, altitude up to 2,000 m.
The warnings and precautions should be read and well
understood before the instrument is used.
When measuring in-circuit components, first de-energize the
circuits before connecting to the test leads.
Discharge capacitor before testing.
Use the meter only as specified in this manual. Otherwise, the
protection provided by the meter may be impaired.
The power for the meter is supplied with six standard 1.5V
batteries.
Do not measure a capacitor that is not fully discharged.
Connecting a charged or partially charged capacitor to the input
terminals will damage the instrument.
When measuring within a circuit, the circuit must be de-energized
before connecting the test leads.
When used in a dusty environment, the instrument should be
wiped and cleaned regularly.
Do not leave the instrument exposed to direct heat from the
sun for long periods of time.
Before removing the cover, ensure that the instrument is
disconnected from any circuit and is powered OFF.
To ensure that you use this device safely, follow the safety
guidelines listed below:
Caution
•
•
•
•
•
•
Dual Display LCR Meter Instruction Manual
Summary of Contents for DT-9935
Page 1: ......
Page 24: ...Dual Display LCR Meter Instruction Manual Rev 110525 ...
