12
input impedances without time restrictions.
The voltage tester also indicates a rotating direction
(L or R) with measurements on single-phase mains
(L1 against N). This is not a device malfunction.
Rotating field direction display
The voltage tester can show the direction of the
rotating field with three-phase systems. Hold the
voltage tester by the handles and provided. Never
touch the device beyond the handle ends. Hold the
two test tips onto the measuring points to be tested.
Test tip corresponds to L1, and test tip corresponds
to L2. The applied voltage and the rotating field
direction is shown on the LCD display The rotating
field symbols (D) show the corresponding rotating
field direction (L = anticlockwise / R = clockwise).
Continuity check
The voltage tester can also be used as a continuity
tester. Always hold the voltage tester by the handles
designed for this purpose. Never touch the device
beyond the handle ends. The continuity tester
