12
2. One of the members of an existing Group Mesh, by pressing 5 seconds
the MESH button, can allow new members to join to the existing Group
Mesh.
C
5 sec
Units will complete the new group, adding the new member. The new
member switches automatically from Open Mesh to Group Mesh and a
voice prompt will confirm it.
3. Repeat the operation of point 2. for each control unit to be added to
private group.
7.5 Reset Mesh (only available if “Advanced Features” is
activated on the APP)
If a Mesh reset command is activated on a device, it returns automatically to
Open Mesh mode (default channel 1). To start MESH reset, press the MESH
button for 8 seconds .
8 sec
7.6 Toggle Open Mesh / Group Mesh modes
Users can toggle between Open Mesh and Group Mesh and vice versa
without reset the Mesh. This allows users to retain their private Group Mesh
connection information while they are in Open Mesh.
To switch from Open Mesh to Group Mesh and vice versa, press the MESH
button for 3 seconds.
3 sec
Note:
If you have never joined Group Mesh before, you cannot switch
between Open Mesh to Group Mesh and vice versa. The voice prompt is
output “No groups available”.
7.7 Enable / disable microphone
Users can mute the microphone during a mesh intercom conversation.
The same command is used to reactivate the microphone.
Press the MESH button for 1 second.
1 sec
Summary of Contents for Interphone U-COM 16
Page 1: ...User manual...
