CellPath JAY-0100-00A, User Manual, Page: 3 / 20

3
www.cellpath.com | T: +44 (0)1686 611333
3
Slimline Slide Drying Hotplate
Symbols
This symbol appears in documents
and on equipment to warn the user
that there are hot surfaces on the
equipment.
This symbol appears in documents
and on equipment to warn the user
that instructions must be followed
to ensure correct or safe operation.
General Notes
Œ
This product is designed for laboratory
use only. Always follow good laboratory
practice.

If this product is not used in accordance
with these instructions then basic
safety protection may be affected.
Ž
If damaged or in case of failure the
power supply unit supplied with this
product should be replaced with an
equivalent power supply unit.

Before using any cleaning or
decontamination method please
refer to the Maintenance and Cleaning
section to ensure the proposed method
will not damage the unit.

Connect only to a power supply with
the corresponding voltage to that
specified on the rating label positioned
on the rear of the unit.
‘
Ensure that the power supply
has an earth (ground) terminal.
Specimen Safety
It is the users responsibility, to ensure that
the temperature set on the instrument,
is at a level where no damage is caused
to diagnostic specimens used with the
equipment. In the event of this instrument
malfunctioning, all specimens within the
device should be checked to ensure no harm
or damage to the specimen has been caused.
Amendments
Issue 4: May 2021
3
www.CellPath.com | T: +44 (0)1686 611333
3