Cellink 000000020356, User Manual

Page: 27 / 48

23
04 Getting started
4.5 Removing the Pneumatic Printhead
1. Move the printhead to the active or loading position from the Tools submenu under the
Utilities menu. See Section 4.2 for instructions.
2. Loosen the screw and remove the cartridge from the top.
3. Twist the cartridge pneumatic adapter and lift it off the cartridge to disconnect the
cartridge from the pressure supply.
4. Cap your cartridge with the top and bottom caps and store it.
5. To remove the printhead, stabilize it using two fingers on the top surface of the printhead
mount (Figure 13A). Press your thumb against the bottom side of the printhead to push the
printhead slightly up (Figure 13B).