- 23 -
Fig. 20 System Test
Test Number
Test Type
Description
1 cooling
1-on;
0-off
2 fan
1-on;
0-off
3) Clock Setting
1. Enter the system setup and set 670 = 0 to unlock screen, then exit.
2. Press CLOCK key; press UP/DOWN keys to change clock.
3. Press DONE key to exit.
4. Enter the system setup and set 670 = 2 to lock screen, then exit.
4) Temperature Setting
1. Enter the system setup and set 670 = 0 to unlock screen, then exit.
2. Press UP/DOWN keys to modify temperature.
3. Enter the system setup and set 670 = 2 to lock screen, then exit.
5) Remote Air Sensor
Enter the system setup and set 340 = 3, then exit
6) Humidity Display
It only displays the humidity where the thermostat is installed. The humidity
level is shown in the lower right corner of the screen.
Summary of Contents for 1/2 Ton-SSL
