Page 18 | 1-855-235-5271
TWS
092115
Drain Line
All systems come with a drain line for removal of excess
condensate. It is mandatory to install the drain line whether it
leads through the wall and out of the cellar or remains inside the
cellar. During operation, the cooling system will condense excess
water from the air in order to maintain the proper level of humidity
within the cellar. However in extreme humidity, additional
condensate will be removed. Thus the drain line will prevent
overflow and leaking by allowing for discharge of the additional
condensate.
Attach the provided tube to the
desired drain line option followed
by running the line to an
appropriate dispense area.
Place hose clamp around the drain
line. Slide the drain line over the
tube at the outlet of the drip trays.
Install the provided hose clamps
where the drain line is attached to
the tube. This will ensure the tube
does not get disconnected.
Failure to install the drain line voids the warranty.
To prevent mold from growing, allow the drain line to hang
above the water line.
Condensate Drain Line Tube
The condensation drain line tube is used to remove excess condensation from the evaporator unit to a proper dis-
charge location. It is important that the drain line tube is properly connected and used to prevent leakage and other
problems associated with excess condensation.
Failure to use the condensate drain line tube will void the warranty on the unit.
VERTICAL MOUNT DRAIN LINE
THROUGH THE WALL DRAIN LINE
OPTION 1
INSIDE CELLAR DRAIN LINE
OPTION 2