www.cellarcool.com | Page 15
Connect the blue disconnect labeled 1 from the
previous slide to the #1 terminal on the Delay on
Break Timer.
Cut the blue disconnect off the wire that was
connected to the #1 terminal of the Delay on Break
Timer. Strip the end of the wire to a length of 3/8”.
43
44
Secure the bare end of the wire from the #3
terminal on the Delay on Break timer inside
of the C lever connector.
Secure the bare end of the wire coming from the
#0 terminal on the compressor contactor relay
inside of the C lever connector.
45
46
