www.cellarcool.com | Page 5
CONDENSING UNIT COLD WEATHER START KIT INSTALLATION INSTRUCTIONS
Peel the label off of the receiver.
Peel the backing off one of the silicone heaters.
Place one of the silicone heaters on the receiver
in the location shown. The heater will not adhere
completely, there are hose clamps installed later in
these instructions that will keep them firmly in place.
NOTE:
Line up the heater so the wires are located
at the fan shroud, and the bottom of the heater is
touching the liquid line.
Peel the backing off the other silicone heater.
3
4
5
6
