Page 6 | 1-800-343-9463
CWSK.WM/FD5000
082015
Place the other silicone heater on the receiver in
the location shown. The heater will not adhere
completely, there are hose clamps installed later in
these instructions that will keep them firmly in place.
Note: Line up the heater so the wires are directed
toward the fan shroud, and the back edge of the
heater is touching the back edge of the other
heater, as shown.
Slide the hose clamps on the receiver over the
silicone heaters. One at the top of the heaters and
one at the bottom. Secure in place as shown.
Wrap the spring from the Thermal Switch Assembly
around the liquid line and secure the clasp of the
spring to the thermal switch as shown.
Slide the thermal switch to the location shown
7
8
9
10
Thermal Switch Assembly
