9
WARNING
Do not over tighten the ¼-20 mounting screw or damage may occur to the screw or camera body
Portrait Orientation:
1.
The Portrait Mounting Plate Assembly (d) is made up of two pieces – the Mounting Plate (d1) and the Dovetail Bar Clamp (d2). To
separate them, loosen the hand screw as shown in
Fig. 13
and
Fig. 14
.
Fig. 13
Fig. 14
Fig. 15
Fig. 16
2.
Slide the Mounting Plate (d1) and the Dovetail Bar Clamp
(d2) apart as in
Fig. 15.
3.
Attach the Mounting Plate (d1) to your camera using the ¼-20
screw as shown in
Fig. 16.
Mounting Plate
(d1)
(d1)
(d2)
Portrait
Mounting
Plate Assembly
(d)
Dovetail Bar
Clamp (d2)
