CEL MeshConnect ISP / WNA ZIC2410USB-WNA-1, User Manual

Page: 3 / 23

REV A 0007 ‐ 05 ‐ 08 ‐ 06 ‐ 001 Page 3 of 22
INTRODUCTION
The CEL MeshConnect ISP / WNA USB dongle (ZIC2410USB ‐ WNA ‐ 1) coupled with the CEL Device ‐
Programmer and CEL Packet Analyzer software tools can serve as all ‐ in ‐ one development tool with the
push of a button. The dongle is capable of In ‐ System Programming (ISP) both the CEL MeshConnect IC
and MeshConnect ‐ based modules. The dongle is also capable of functioning as a Wireless Network
Analyzer (WNA), or packet sniffer, when debugging wireless applications.
CEL MeshConnect ISP / WNA Features

Powered from USB, doesn’t require an external power supply

USB 2.0 compliant (full speed, 12 Mbps)

Software / Firmware upgradeable to support future releases

Compatible with SNAP™ software from Synapse Wireless

Compatible with CEL Device Programmer software tool (v3.50 and later)
o
Supports the CEL MeshConnect IC and MeshConnect ‐ based modules
o
Supports Security Settings programming
o
Supplies Target Voltage of 3.0 V

Compatible with CEL Packet ‐ Analyzer software tool (v3.32 and later)
o
Supports CEL MeshConnect Normal (250 kbps), Turbo (500 kbps) and Premium (1
Mbps) wireless data rates
Figure 1: CEL MeshConnect ISP / WNA USB Dongle
The CEL MeshConnect ISP / WNA is supported by CEL Device ‐ Programmer and CEL Packet ‐ Analyzer
software tools. Updated versions of the aforementioned software can be found under the Software
Downloads section of the 802.15.4 / ZigBee products at http://www.cel.com .