Ceia PD240CH, Instruction Manual

Page: 14 / 20

12 Maintenance
FI100K0025v1100 UK - - PD240CH
3 Maintenance
3.1 Periodic maintenance
3.1.1 Cleaning

Use a slightly moist, nonabrasive cloth for cleaning.

Do not wash the device with liquid detergents or chemical substances.
3.1.2 Battery

Keep the battery charger pins present on the metal detector handle and on the HHDS
module clean, to ensure proper electric contact.

In
case
of a prolonged period of storage/unuse Ni-MH batteries lose naturally
almost all their charge and then they might have difficulties in recharging. In
order to prevent that, we recommend that they undergo a complete charge
cycle at least every 4 months even when unused. Recharge the batteries every
month to keep them always ready to use (charge at 80% or more).
3.2 Troubleshooting
Signal or symptom Probable cause Action
Alarm signal after start-
up.
Start-up carried out
near a metal mass.
Move the deìector away from the
metal mass and reset the detector
(refer to section “Alarm Reset”.
Electromagnetic
sources present near
the detector:
- Other hand-held
metal detectors
with the same
operating channel
Use hand-held metal detector with
different operating channel (using
the accessory
HHMD Configuration
Tool
).
- Walk-through metal
detectors or other
electromagnetic
sources in close
proximity
Increase distance.
Use hand-held metal detector with
different operating channel (using
the accessory
HHMD Configuration
Tool
).