Every care has been taken to ensure the accuracy of the information contained in this publication, but due to continuous development and improvement the right is reserved to supply products
which may differ slightly from those illustrated and described in this publication.
14
www
.ceg.co
www
.ceg.co
www
.ceg.co
www
.ceg.co
www
.ceg.co
ELECTRONIC PRESSCONTROL PC-1100
TECHNICAL DATA
PRESSCONTROL is a device that guarantees optimal control of pumps for domestic use. Deriving from
a hydraulic and electronic logics project for the Australian and New Zealand market, it is capable of
simultaneously detecting both the pressure and the flow, as well as automatically managing the pump
operation. It replaces the traditional pressure controller and pressure tank, protecting the pump in the
case of water shortages. PRESSCONTROL:
- Starts and stops the pump in accordance with the opening and closing of the taps
- Maintains constant pressure during delivery
- Stops the pump in the case of water shortage, protecting it from dry running
- Maintenance-free
5°C - 40°C
Water temperature range min / max
Ambient temperature
Max. working pressure
Inlet/outlet pipe connection
Max particle size
Electrical supply
0°C - 50°C
10 bar
25 mm BSP / 1” Inch BSP
1 mm (non-abrasive material)
220V - 240V, 50 Hz
Table 6.0
PRODUCT DESCRIPTION
Power on
Pump on
Failure
Restart
Power
Inlet
ELECTRIC MOTORS AND PUMPS
UNIT STARTING AND WORKING
INTEGRATED
INTELLIGENCE
INTEGRATED
INTELLIGENCE
Electrical connection
AS/NZ plug fitted to 1.5m lead
Max current
10 A
Software version
4.0
Start pressure
1.5 bar
