ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
10
TESTING/OPERATION CONTINUED…
4.7
If speed dial numbers were programmed into the phone, try using them.
Lift the handset and press the # key followed the two digit location code.
The number stored in that location should automatically dial out. Try all
of the locations that were programmed. If any of them do not work, repeat
sections 3.2, 3.3, 3.10 and 3.12 only. It is not necessary to reprogram all
of the speed dial numbers, but only the ones that are not working. If they
will not program, please, refer to section 11.2.
5.0 RECOMMENDED TOOLS AND TEST EQUIPMENT
DTMF Test Set
Security Tool 301-037
1/4" Nut Driver
*The security tool is for a standard 5/32
∀
5/16" Nut Driver
button-head screw generally used on the
Volt/Ohm Meter
framework of telephone booth
Flat Blade Screw Driver