ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
8
PROGRAMMING CONTINUED…
3.10
If a
second auto-dial number
is desired,
enter # 0 1 followed by the
desired second auto-dial number.
This number will automatically dial
out after the selected number of unanswered rings from the first auto-dial
number. The number of rings is selected under Digit 6 in programming
section 3.9. The second auto-dial number may be up to eleven (11) digits
in length. If this is not a desired feature, proceed to section 3.11.
Example: Enter
# 0 1
7 7 7 1 3 1 3. During programming in the next
section (3.9), enter a “2” for Digit 6 in programming section 3.9. This will
program the phone to automatically dial the number 777-1313 after the
first auto-dial number receives two (2) unanswered rings.
3.11
When
programming is finished
, return the
mini-jumpers
to the
"OFF"
position.
Hang up the phone
by pressing the CALL button. The phone is
now
ready for Testing/Operation
.
4.0 TESTING/OPERATION
4.1
Connect the telephone to a working telephone line.
4.2
To make a call, press the CALL button located on the front of the phone.
When dial tone is received, the transmitter is muted and the phone waits
for numbers to be dialed. The LED will light RED at this time, and the
preprogrammed number(s) will dial out on the line. A normal
speakerphone conversation should be permitted when the call is answered.
4.3
If the telephone was programmed to allow second-number auto-dialing, it
should automatically dial the second number, after the selected number of
unanswered rings (1-9). It will continue to oscillate between the dialing of
the first and second auto-dial numbers, if no answer is received.
4.4
When the call is complete, press the CALL button again to hang up. The
LED will go out and the call will be terminated.
4.5
If the user does not press the CALL button when he or she is done, the
phone will hang up after detecting a wink back from the far end, or when
the selected time-out period (see section 3.7 Digit 3) expires.
4.6
Place a call into the phone. If the phone was programmed to allow
incoming calls, answer the phone and the microphone should activate
within approximately three (3) seconds. A normal speakerphone
conversation should follow. If the phone was programmed not to allow
incoming calls, the microphone will not activate.
