ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
7
EXAMPLE:
Enter #00 0160020005
Phone will be set as follows:
DIGIT 1 .. ALWAYS 0
DIGIT 2 .. INCOMING CALLS ALLOWED
DIGIT 3 .. 6 MINUTE TIME OUT FOR EMERGENCY CALLS
DIGIT 4 .. ALWAYS 0
DIGIT 5 .. ALWAYS 0
DIGIT 6 .. ACTIVATED SECOND-NUMBER AUTO-DIAL AFTER 2
UNANSWEREDRINGS
DIGIT 7 .. ALWAYS 0
DIGIT 8 .. DO NOT DIAL PBX NUMBER STORED IN LOCATION#18
DIGIT 9 .. ALWAYS 0
DIGIT 10 . 250ms WINK
3.8
Enter # 1 9 followed by the desired auto-dial number
. When the phone
is in operation and the CALL button is pressed, this auto-dial number will
automatically dial out. This number may be up to eleven (11) digits in
length.
#19 ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example:
Enter
# 1 9
5 5 5 1 2 1 2. This will program the phone to
automatically dial the number 555-1212, whenever the CALL button is
pressed.
3.9
If it is necessary for the telephone to automatically dial a PBX access code
or number, enter
# 1 8 followed by the desired PBX access code or
number.
When the phone is in operation and the CALL button is pressed,
this number will automatically dial out, followed by the auto-dial number.
There will be approximately a one (1) second pause between the dialing of
the two numbers. This number may be up to eleven (11) digits in length.
If this is not a desired feature, proceed to section 3.10.
Example:
Enter
# 1 8
9. This will program the phone to automatically
dial the number 9, pause approximately one (1) second, and automatically
dial the auto-dial number, whenever the CALL button is pressed.
#18 ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
