CEECO SSP-571-D2 Service Manual Download Page 13

ISSUE 4.0 

CEECO 

Communication Equipment & Engineering Company 

PROPRIETARY 

13

10.0  REPAIR AND RETURN INFORMATION 
 

 

10.1   

WARRANTY REPAIR

 

 

Any device returned requiring warranty service, repair or credit must be 
accompanied with a "Returned Material Authorization" (RMA) Form. It 
must include:  Return  shipping  instructions,  original  purchase  order 
number and special marking instruction.  A description of the trouble 
observed must be attached to the defective unit.  This information must be 
inside the shipping container. 

 
 

10.2   

DIRECT ALL INQUIRIES TO: 

 

CEECO 

 

 

 

 

 

REPAIR DEPARTMENT 

863-357-0798- telephone 
863-357-0006- facsimile 

[email protected]

 

www.ceeco.net

 

 
 

10.3   

NON-WARRANTY REPAIR

 

 

CEECO will repair equipment out of warranty for a set charge plus parts.  
The customer  must pay the shipping costs both directions. 

 
 

10.4   

RETURN FOR CREDIT

 

 

Material may be returned for credit only with prior approval.  Material 
authorized for  return is subject to a 20% restocking charge based on the 
manufacturer's list price.  Return RMA must be requested no later than 30 
days after original shipment. 

 
 

10.5   

EXCHANGE POLICY

 

 

If a replacement unit is required, it will be shipped in the most expedient 
manner consistent with the urgency of the situation.  Please contact 
"customer service" for instructions regarding exchange of modules or 
printed circuit boards. 

Summary of Contents for SSP-571-D2
















Reviews: