Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021
14
Safety instructions
Safety
3 Safety
This chapter contains information on the safe operation of the machine:
• Safety instructions (page 14)
• Operator's obligations (page 16)
• Qualifications of personnel (page 18)
• Safety equipment (page 20)
• Signs on machine (page 23)
• Residual danger (page 26)
3.1 Safety instructions
The following sections contain basic safety instructions:
• Operating safety (page 14)
• Impermissible operating conditions (page 15)
• Notes on operation (page 15)
• Notes on using accessories and aids (page 15)
• Notes on environmental protection (page 16)
• Supplementary regulations (page 16)
3.1.1 Operating safety
The machine is safe to operate. It has been built in accordance with state-of-the-art science
and technology.
Nevertheless, the machine may present hazards, i.e. if
• the machine is not used for the intended purpose,
• the machine is used improperly,
• the machine is operated under impermissible conditions.
The following instructions apply to anyone who works on or with the machine:
• It must be ensured during all work that no one can be injured by moving parts of the
machine.
• The diesel engine heats up during operation.
• All protective covers must be fitted correctly.
• Changes to the sequence of movements or malfunctions must be reported immediately
