Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021
18
Qualifications of personnel
Safety
3.2.3 Operating machine fault-free
The following principles apply for fault-free behaviour:
• The operating manual must be kept complete, clearly legible and accessible for every-
one at the machine operating site.
• The machine may only be used for the intended purpose.
• The machine may only be used in proper, fully functional condition.
• Before beginning work, the safe operating condition must be checked.
• The proper operation of the machine and safety equipment must be checked regularly.
• The proper operation of the Emergency-Stop function must be checked daily.
TIP
Carry out regular checks. This enables you to ensure that these measures are also actually
applied.
3.3 Qualifications of personnel
This section contains information on the qualifications of the personnel:
• Minimum requirements (page 18)
• User groups (page 19)
• Specific specialist knowledge (page 19)
3.3.1 Minimum requirements
This section contains information on how the personnel must be trained, which works on the
machine.
All work on the machine requires the personnel to possess special knowledge and skills.
Anyone, who works on the machine must meet the following conditions:
• Personally suited for the respective activity. Observe the legally permissible minimum
age.
• Sufficiently qualified for the respective activity.
• Instructed in using the machine.
• Familiar with the safety equipment and its operation.
• Familiar with this operating manual, and in particular with the safety instructions and
with the sections relevant for the activity.
• Familiar with basic regulations on occupational safety and accident prevention.
All persons must always provide proof of one of the following minimum qualifications:
• Trained as a specialist to work independently on the machine.
• Sufficient instruction to work on the machine under the supervision and instruction of a
trained specialist.
