www.usaprocom.com
200032-01A
14
NG
LP
NG
LP
FAN
HOT
NG
LP
NG
LP
INSTALLATION
Figure 12 - Assembling Base Feet
Figure 13 - Attaching Base Feet to Heater
Figure 14 - Securing Heater to Floor
Foot
Columns
Leg
Bracket
Base Cut Out
Screw
Hole
Screw
Screw
Finished
Assembly
INSTALLING BASE FEET
5. Position the heater to the desired location.
Secure the base feet to the floor by us-
ing two Phillips head self tapping screws
(provided) (see Figure 14).
1. Snap the left and right foot columns to-
gether (see Figure 12).
2. Place the column assembly in the center
of the base cut out. Fasten column as-
sembly by using two Phillips head self
taping screws (provided) (see Figure 12).
3. Place leg bracket on the top of column as-
sembly and fasten it by using two Phillips
head self tapping screws (provided) (see
Figure 12).
4. Align four screw holes to the base of
the heater and attach it by using Phillips
head self tapping screws (provided) (see
Figure 13).
FAN
HOT
Figure 11 - Mounting Heater Onto
Mounting Bracket
Mounting Bracket
(attached to wall)
Horizontal
Slots
Stand-Out
Tab
Placing Heater On Mounting
Bracket
1. Locate two horizontal slots on back panel
of heater (see Figure 11).
2. Place heater onto mounting bracket. Slide
horizontal slots onto stand-out tabs on
mounting bracket.
