CONGA ROCKSTAR 1300 X-TREME
49
48
ENGLISH
ENGLISH
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
Fig. 2
- To install the brush head into the vacuuming tube, align both of them making sure the tab
on the brush head matches the guides on the tube, and introduce one into the other until
they are firmly fixed. To disassemble them, press the brush head release button and pull
from the vacuuming tube while you hold the brush head.
- When assembling these two parts, make sure the handle and the brush head are facing
the same direction.
Battery assembly
- Insert the battery into the slot in the main body. Once inserted, check that it is securely in
position. Fig. 3
- Following the below illustration, keep the vacuuming tube vertically, align the tab on the
vacuuming tube with the guides in the main body and introduce the tube.
Dust tank assembly
- To make the dust tank assembly and disassembly easier, we recommend you separate first
the main body from the vacuuming tube.
- Then, press the vacuuming tube release button with one hand and, holding from the handle
with the other one, turn the dust tank anticlockwise to the unlock position indicated on the
dust tank edge. Fig. 4
Floor head, vacuuming tube and main body assembly.
To complete the installation of the device, hold the vacuuming tube with the brush head
assembled upright and introduce the tube in the main body as shown on the illustration. Fig. 5
4. OPERATION
You can use this vacuum cleaner in two different manners:
- Handheld vacuum cleaner, attaching the accessories directly to the main body.
- Upright vacuum cleaner, using the vacuuming tube with the accessories assembled.
Handheld vacuum cleaner
Once you have removed the main body from the vacuuming tube:
- Press the On/off button to turn the device on.
- Press the power push button to select the desired power level. Fig. 6 and 7
- It will automatically operate in Eco mode. The power level can be adjusted at any moment
by pressing this button.
1. PARTS AND COMPONENTS
Fig. 1
1.
Vacuum cleaner brush head release button
2. Vacuuming tube release button
3. Dust tank release button
4. High-efficiency filter
5. Power push button
6. On/off button
7. Power supply
8. Battery
9. Power adapter
10. Vacuuming tube
11. Vacuum cleaner brush head
12. Narrow brush for furniture and corners
13. Wide brush for furniture and corners
14. Wall bracket
15. Dust tank
16. Jalisco brush
*The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- Take the product out of the box.
- Check for any visible damage. If any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
Box contents
- Conga Rockstar 1300 X-Treme vacuum cleaner
- Wall bracket
- Jalisco brush
- Includes a wide 2-in-1 accessory for corners and furniture
- Includes a 2-in-1 narrow accessory for corners and furniture
- Instruction manual
