PROBLEM
PROBABLE CAUSE
REMEDY
6
a) Leaking Water Dispense Valve
a) Replace Water Dispense Valve
Water drips from
b) Mixing Chamber clogged.
b) Clean Mixing Chamber.
mixing chamber
7
a) Product throw too high
a) Adjust product throw rate. (See "Product Strength
Product too strong.
Adjustments" Volume & Gram Throw)
8
a) Product throw too low
a) Adjust product throw rate (see" Product Strength
Product too weak.
Adjustments")
9
a) Whipper Blade missing.
a) Replace Whipper Blade
Product not whipped.
b) Loose electrical connection to motor.
b) Check electrical connections to motor.
c) Whipper Motor defective.
c) Replace Whipper Motor.
10
a) Whipper blade not properly aligned or is missing.
a) Check blade alignment, if needed replace blade and mixing
Noise coming from
Chamber.
mixing chamber
11
a) Hopper not properly engaged in back, or
a) Check the mating between the auger motor's
Grinding noise coming
Hopper not seated properly
Gear and hopper's coupling/nut. Check also pin in base.
from unit
Pin must be dropped into hole in base.
10
