9
Assembling the welding machine
The standard composition of this welding installation consists
of:
• COMPACT 240M generator.
• Ground lead integrated with the machine 3 m long.
The supply also includes the rear wheels for moving the weld-
er, a chain for securing the gas cylinder to the cylinder trolley,
a handle for moving the machine by hand and two eyebolts for
lifting the machine.
Perform the following operations before using the machine:
• Remove the welding generator and all relative accessories
and components from the packaging.
• Check that the welding apparatus is in good condition, other-
wise immediately inform the retailer or distributor.
• Check that all ventilation grilles are open and that no objects
obstruct the free passage of air.
• Assemble the machine as shown in figure A.
Table 1
Model
COMPACT
240M
Single-phase power supply 50/60 Hz
V
230
Mains supply: Z
max
(*)
Power input @ I
2
Max
kVA
11,9
Delayed fuse (I
2
@ 60%)
A
25
Power factor / cos
0,96
Maximum efficiency degree
0,58
Open circuit voltage (max)
V
22 ÷ 50
of switch positions
7
Current range
A
50 ÷ 250
Duty cycle @ 100% (40°C)
A
110
Duty cycle @ 60% (40°C)
A
150
Duty cycle @ 35% (40°C)
A
200
Duty cycle @ 20% (40°C)
250
Wire diameter
mm
0,6 ÷ 1,2
Standards
IEC 60974-1
IEC 60974-10
Insulation class
IP 23 S
Protection class
H
Dimensions
mm
860-540-790
Weight
kg
59
(*) IMPORTANT:
• This plant meets the requirements laid down in the EN/IEC 61000-
3-12 standard on harmonic currents.
• This system, tested according to EN/IEC 61000-3-3, meets the re-
quirements of EN/IEC 61000-3-11.
FIG. A
200
0H91
7
Summary of Contents for COMPACT 240M
Page 21: ...93 39 40 41 42 43 44 45 46 47 48 49 51 50 52 53 54 54 ...
Page 26: ...98 ...
Page 27: ...99 ...
Page 28: ......