EN
EN
SOLAR2R
Standalone proximity keypad
2
cdvigroup.com
90
130
35
Poids (g) :
Vol. (mm
3
) :
Projet : ...
Plan d'ensemble
SOLARKPW
Etat de surface : Ra 3,2
Tolérance gale :
0.1
Matière : PC V0
DES.: A. Broustal
A3
ECHELLE 1:1
Date 23/07/2010
Edition 00
Plan M1849
31, av du Gal Leclerc
93691 PANTIN CEDEX
F R A N C E
Tel : 33(0)148910102
Fax : 33(0)148912121
www.cdvi.com
Ce document est la propritété exclusive de CDVI, il ne peut être communiqué à des tiers sans son autorisation.
This document is the exclusive property of CDVI and it may not be disclosed to others without permission.
C.A. :
F0101000072
147
124
55
IP52
CE certification
Remote electronics, supplied
with the SOLAR2R keypad
-25°C to +70°C
1] GENERAL INFORMATION
Construction: Polycarbonate
Remote electronics
Capacity of 1000 users
Stored in non-volatile EPROM memory.
Buzzer audible signal.
Backlit keypad.
Sensitive touch keypad
3 Form «C» Relay outputs:
Adjustable time output :
1 to 99 seconds and toggle mode.
Operating voltage: 12Vdc.
Consumption: 200mA.
Surface-mount.
Mounting with Torx
®
screws.
Dimensions (L x W x D): 130 x 90 x 35 mm.
3] MOUNTING KIT
MOUNTING KIT
2]
2] NOTES & RECOMMENDATIONS
Recommended power supplies.
- ADC335 (230V input), BS60 (230V input).
- Separate power supply for the control elements.
Wiring
- The distance between the keypad
and the remote electronic can not exceed
more than 50 meters.
- Make sure that the cable is not near by a high
voltage cables (ex: 230V ac).
-
Recommended cable between the keypad
and the remote electronics: 2 twisted pairs
(4 wires) SYT1 0.8MM.
Mounting recommendations
Mount the keypad on a flat surface to avoid
any vandalism and to insure the best mounting.
In configuration two keypads, keep a minimum
distance of 1m between the two keypads.
Security advice
- For security advice reasons, change
the factory default master code.
- When selecting a master code and user code
avoid simple codes (example :
3 4 5 6 7
).
Back EMF protection
To secure the system from back electromagnetic
fields do not forget to mount the varistor
in parallel on the lock.
IP53
-30°C to +70°C
Vibrations tests
IK10
Standalone
Controller
Reader
Foam seal
M4x30
TF screw
S5
Plastic anchor
TORX
®
bit
M3x8 TORX
®
screw
SOLAR2R
1
1
1
4
4
1
1
TMSOLAR2R
0
1
1
2
2
1
1
130
90
35
