K32+-EQ00
Printed in Canada - 05/2014
PARADOX.COM
Quick Start
K32+ Keypad
How To Arm
Arming When Exiting
To arm your system when exiting:
Arming When Staying
To Stay arm your system:
To Sleep arm your system:
Off Light (orange†)
On = Disarmed
Off = System armed
†
Some models feature a
red LED instead of an
orange one.
AC Light (yellow)
ON = Power on
OFF = Power off
StayD Light (green)
ON = StayD on
= Press once + [
MASTER
CODE
] for Quick Menu
Programming)
Zone Display:
The numbers [1] to [32] correspond to zone
1 to 32 respectively. Open or entry delay
zones are illuminated, and flash in alarm.
Arm (red), Sleep (yel), Stay (grn)
On = Partition armed
Off = Partition disarmed
Flash = Exit Delay
Fast Flash*= Exit Delay
(final 10 sec.)
Fast Flash*= Partition in alarm
* Audible Indicators:
Continuous beep = Alarm
Variable beep = Fire alarm
Intermittent beep= Beginning
of exit delay
Fast beep = Final 10 sec. of
exit delay
[TBL] Trouble display
ON = Trouble(s) occurring
[MEM] Alarm memory display
ON = Alarm(s) occurred
[BYP] Bypass programming
ON = Zone(s) bypassed
Partition 1 Status Partition 2 Status
Step
Description
1.
Close all zones in the desired
partition.
2.
Enter your [ACCESS CODE]** or
press the [ARM] key +[ACCESS
CODE].
Step
Description
1.
Press the [STAY] key.
2.
Enter your [ACCESS CODE]**.
Step
Description
1.
Press the [SLEEP] key.
2.
Enter your [ACCESS CODE]**.
To Disarm
[OFF] + [ACCESS CODE]**
** If needed, press button(s) corresponding to desired partition(s). For two partitions, press the
other key after the confirmation beep.
