background image

3

cdvigroup.com

EN

ATRIUM A22POE

2-Door Controller

  INSTALLATION MANUAL

EN

ATRIUM A22POE

2-Door Controller

  INSTALLATION MANUAL

1] PRODUCT PRESENTATION

The A22POE is ATRIUM’s powerful Web-Based PoE+ hybrid module. The flexibility of the A22POE module allows 

it to be set either as a 2-door controller or expander (2 in 1). The A22POE includes an embedded web server 

that combines performance and simplicity enabling you to manage Users/Cards, lock or unlock doors, view 

system events and display controller information from any place in the world! Industry-unique and effortless 

card enrollment mode minimizes system start up and simplifies your life. A pre-assembled PoE+ splitter is 

included with every A22POE making this unit an industry leader in efficiency and simplicity.

•  Control 2 doors / 2 readers
•  Embedded Web Server
•  Pre-assembled PoE+ Splitter
•  On-board Ethernet Port with AES 256-bit encryption
•  Auto-detect hardware modules (No DIP Switches)
•  Quick and easy card enrollment procedure
•  6 Multi-purpose inputs (12 using zone doubling)
•  Totally fuseless system
•  Up to 10,000 users
•  Up to 10,000 cards
•  Up to 25,000 Event Buffer
•  Up to 100 holidays
•  Up to 1000 Access Levels
•  Up to 250 Schedules each supporting up to 

  100 time periods (dd, hh:mm) and recurrence
•  Full calendar with leap year support (yyyy-mm-dd)
•  Time zone definition (full D.S.T. support)
•  10 Areas per controller
•  Ultra fast firmware update (less than 10 seconds)
•  FREE Management Software
•  Wiegand & ABA Track II magnetic stripe compatible
•  Maintenance-friendly snap on terminal connectors
•  Comprehensive LED status indicators

Power Over Ethernet

Summary of Contents for ATRIUM A22POE

































Reviews: