35
Installation - assembly
Always wear adequate PPE (Personal Protective Equipment) for
the tasks at hand. This product may have sharp edges.
Lay a clean, soft towel (or similar) somewhere smooth and flat. This will
protect the hob and the surface below. Remove the hob, turn it upside
down and place it on the towel. Place the airbox onto the extractor
opening as per Fig. 10. There are hooks and slots on the airbox and
hob respectively; slot the airbox in and push in the direction that the
hooks dictate, as per Fig. 11. Fasten the airbox to the hob using the
metric screw provided and the screw hole near the extractor opening
(Fig. 12).
~ 2 mm
Fig. 10
Fig. 11
Fig. 12
Fig. 13
