manualshive.com logo in svg

CDA CI327, Installation, Use And Maintenance Manual

Share
Download
CDA CI327 Installation, Use And Maintenance Manual Download Page 36

36

How to connect an alternative plug

If the fitted plug is not suitable for your socket outlet, then it should be 
cut off and disposed of safely to prevent the risk of electric shock.  A 
suitable alternative plug of at least 13 Amp rating to BS 1363 should  
be used.

As the colours of the wires in the mains lead of this appliance may not 
correspond with the coloured markings identifying the terminals in your 
plug, proceed as follows:-

•   

The wire which is coloured 

GREEN

 

and

 

YELLOW

 must be connected 

to the terminal which is marked with the letter

 (E)

 or by the 

Earth

  

 

symbol   or coloured 

GREEN

 

and

 

YELLOW

.

•   

The wire which is coloured 

BLUE

 must be connected to the terminal 

which is marked with the letter 

(N)

, or coloured 

BLACK

.

•   

The wire which is coloured 

BROWN

 must be connected to the 

terminal which is marked with the letter 

(L)

 or coloured 

RED

. 

If in doubt regarding the electrical connection of this appliance, consult a 
qualified electrician. Do not shorten the supply cable, the appliance may 
require removing for servicing.

N.B. Ensure that the plug socket is situated in an easily accessible place.

The plug must be used with a specially earthed socket of 13 amperes. 
If there is no such socket in your house, please have one installed by 
an authorised electrician.

Appliance electrical rating: 

 1950W

Summary of Contents for CI327













































Reviews:

No comments

Brands by name

Popular brands

Load more brands