background image

16

Cotton

This programme can be used for daily washing, the wash cycle is long 
and intensive. The default temperature is 40°C

MyChoice

Press the ‘Spin speed button’ for approximately 3 seconds for the 
machine to remember the cycle/setup of your choice (if you have 
customised temperature, spin speed etc.). The default MyChoice 
cycle is Cotton. Once you have created and/or saved a cycle as per 
the above steps, this will be the MyChoice cycle thenceforth

Starting a wash programme & features

•   

Turn the ‘Programme selector dial’ to the required programme.

•   

Select the required spin speed using the ‘Spin speed button’.

•   

Select the wash temperature using the ‘Temperature selection 
button’.

•   

Select any required extra options, as detailed on the following 
pages.

•   

Press the ‘Start / pause’ button.

When a wash programme is in progress, the programme can be 
paused by pressing the ‘Start / pause’ button at any time. To resume 
the programme, press the ‘Start / pause’ button again.

Programme selection

To select a programme, turn the ‘Programme selector dial’ to the 
required programme, as detailed in the programme listing on page

Summary of Contents for CI327













































Reviews: