background image

17

13 and also on the detergent dispenser. The display will show the 

programme duration. 

Spin speed selection

Each selected programme has its own preset spin speed, as shown in 

the programme listing on page 13.

If you press the ‘Spin speed button’ the currently set spin speed will 

show on the display. You can reduce this or switch it off completely 

if required by pressing the ‘Spin speed button’ a number of times.  If 

you miss the speed you want you can come back round to it again by 

pressing a few more times.  

A programme without final spin is used to prevent creasing when 

washing special fabrics.

Wash temperature selection

Each selected programme has its own preset wash temperature, as 

shown in the programme listing on page 13.

If you press the ‘Temperature selection button’ the currently set 

temperature will show on the display. You can change the wash 

temperature if required by pressing the ‘Temperature selection button’ 

a number of times. If you miss the temperature you want you can 

come back round to it again by pressing a few more times.  

Extra functions

Extra functions can be selected once the programme has been set.  

To select any extra function, press the additional functions button.  

The programme table on page 13 shows the functions available for 

each programme. The programme time shown on the display will 
reduce or increase, according to the extra functions selected.

Summary of Contents for CI327













































Reviews: