38
REVO RT
from 35A to 90A
User’s manual
10.2 SSR control outputs
P43 - Command Output Loop 1 (Address ModBus 2043)
Enables control output 1 related to Loop 1
0
1
2
Disabled
Enabled
3.PHA
Output disabled
Output Enabled (
Default
)
Output enabled in three-phase mode (Loop 2 and Loop 3 will no longer be active, while the three
SSRs will be switched on in parallel with output 1)
P57 - Command Output Loop 2 (Address ModBus 2057)
P71 - Command Output Loop 3 (Address ModBus 2071)
Enables control output 1 related to Loop 1
0
1
Disabled
Enabled
Output disabled
Output Enabled (
Default
)
P44 - Initial state Loop 1 (Address ModBus 2044)
P58 - Initial state Loop 2 (Address ModBus 2058)
P72 - Initial state Loop 3 (Address ModBus 2072)
Select the initial state of the adjustment zone 1 after switching on
0
1
2
Start
Stop
Last state
Zone enabled (
Default
)
Zone disabled
Start / Stop status prior to shutdown
P45 - Input selection Loop 1 (Address ModBus 2045)
P59 - Input selection Loop 2 (Address ModBus 2059)
P73 - Input selection Loop 3 (Address ModBus 2073)
Select the input connected to the regulation loop
0
1
2
Input 1 (
Default
)
Input 2
Input 3
P46 - Setpoint connected to Loop 1 (Address ModBus 2046)
P60 - Setpoint connected Loop 2 (Address ModBus 2060)
P74 - Setpoint connected Loop 3 (Address ModBus 2074)
Selects the reference setpoint for the control loop
0
1
2
Setpoint 1 (
Default
)
Setpoint 2
Setpoint 3
P47 - Control Action Type Loop 1 (Address ModBus 2047)
P61 - Control Action Type Loop 2 (Address ModBus 2061)
P75 - Control Action Type Loop 3 (Address ModBus 2075)
Type of action for controlling the output of the regulation loop
0
1
Heating
Cooling
Reverse action (
Default
)
Direct action
Summary of Contents for REVO RT
Page 2: ......
