CD Automation REVEX 1Ph 280A User Manual Download

Page: 48 / 63

REVEX

1PH 280A

User’s manual

10.6.4. Load Analyzer

Load Analyzer is used for monitoring values graphically represented

Click on

Load Analyzer

button on

the test page to open Load Analyzer
window.
It’s possible to see 3 channels (Ch 1, Ch
2 and Ch 3).

For each channel confi gure a pen on

the graph:

On/Oﬀ button

: click to start trending

data reading

: choose the parameter to trend

Show

: set this option to display or

hide the trend

Show Mark

: set this option to display

data markers along the trend in the
graph area

Live!

: click to view the current

waveform on a graph.

Data Log

: click to open the Data

Log window.

The

History

options to control the

movement of the chart:

Scroll left-click

: move the chart left

to view more recent data

Stop/Play-click

: toggle the live

view or Hystorical view of graphic
signal

Scroll right-click

: move the chart

right to view older data

The

Actions

to:

Clear

: to clear the data from the graph

Save

: to save a JPEG image of the

Load Analyzer

window with the current trends

Export

: to open a window that includes the trend graph and table with the currently displayed data that can

be saved as a JPEG or exported to a CSV fi le.

Use the

X – Scale

settings to adjust the horizontal (time) axis:

Min

: set the minutes of data displayed

Sec

: set the seconds of data displayed

Filter

: set this option to fi lter the data

Use the

Y – Scale

settings to adjust the vertical (percent of full scale) axis

Max

: set the maximum value for the vertical axis

Reset

: click to reset the vertical axis scaling

NOTE!

Use the increment (up arrow) and decrement (down arrow) buttons to adjust the x and y scales.

Numeric entry does not allow the full range of values to be set.

Summary of Contents for REVEX 1Ph 280A
































































Search results

Summary of Contents for REVEX 1Ph 280A

Reviews:

Related manuals for REVEX 1Ph 280A

Brands by name

Popular brands

CD Automation REVEX 1Ph 280A, User Manual

Search results

Summary of Contents for REVEX 1Ph 280A

Reviews:

Related manuals for REVEX 1Ph 280A

Brands by name

Popular brands