User’s Manual
CD-KP for CD3000E & Multidrive
C.D. Automation Srl
21
www.cdautomation.com
2.8.13 Calibration menu password (
P.CAL
)
Protection password for calibration menu.
Possible values:
0
–
255
If this value is set to
0
then there is not password protection and the access to calibration
menu is free for all operators.
If this value is different from
0
then a password is asked (
uLOC
) before to enter in calibration
menu. The operator must insert a valid password by pressing the up
and down
keys and
confirming it by the roll key
. If a wrong password is entered, the CD-KP will return to the
main menu.
2.8.14 Diagnostic menu password (
P.DIA
)
Protection password for diagnostic menu.
Possible values:
0
–
255
As password for calibration menu, but referred to diagnostic menu.
2.8.15 Setup menu password (
P.set
)
Protection password for setup menu.
Possible values:
0
–
255
As password for calibration menu, but referred to setup menu.
2.8.16 Configuration menu password (
P.Con
)
Protection password for configuration menu.
Possible values:
0
–
255
As password for calibration menu, but referred to configuration menu.
2.8.17 Command menu password (
P.Cnd
)
Protection password for command menu.
Possible values:
0
–
255
As password for calibration menu, but referred to command menu.
2.8.18 Off-line menu password (
P.OF.L
)
Protection password for off-line menu.
Possible values:
0
–
255
As password for calibration menu, but referred to off-line menu (future implementation).
2.9 Restoring of default configuration
It is possible to restore the default settings of CD-KP:
1. disconnect the supply voltage to CD-KP
2. press up
and L/R
L
R
keys together
3. connect the supply voltage to CD-KP
4. the message
Ldef
will appear in upper display and after a
while the operator menu will be displayed
5. the factory configuration has been restored (see default settings paragraph).
Warning:
all changes done in configuration menu will be lost after this operation.
L.dEf.
L
R
Summary of Contents for CD3000E
Page 2: ......
