C.D. Automation Srl
CD-KP for CD3000E & Multidrive
User’s Manual
www.cdautomation.com
14
2.4 Command menu (
Cnd
)
In this menu is possible to send two commands to the thyristor unit connected to CD-KP:
-
reset command to delete alarms and restore the unit to re-start (
re.st
will flash in lower
display)
-
start command to start the unit after a reset (
Star
will flash in lower display)
The operator can select the command by pressing the roll key
.
The command will be sent by pressing together the up
and down
keys.
To return to main menu, press together the roll
and up
keys.
2.5 Calibration menu (
CAL
)
In this menu is possible to display and modify the parameters 116 (operative voltage) and 119
(nominal current of the load) and to execute the automatic heater break alarm calibration.
The parameter 116 will appear in upper display (
u400
), the parameter 119 will appear in
lower display (
n
8
8
.
6
). The roll key
will choose wich parameter to modify (flashing letter)
and up
and down
keys will change the value.
Pressing together the up
and down
keys will launch the heater break alarm calibration
and the
CAL
message will appear in lower display.
Warning:
also when the
CAL
message disappear the thyristor unit could be still in calibration.
To return to main menu, press together the roll
and up
keys.
Summary of Contents for CD3000E
Page 2: ......
