OPM-C60/OPP-C60
System Manual
PA72P002_en
Edition: 40
Page 57 - 68
Product specific instructions
Confidential
© CCV GmbH - It is not allowed to duplicate or distribute this document without our agreement.
6.4.1.10 Notes for privacy shield by PINPads
The terminal must be integrated into the complete device in a way that it satisfies the following
criterias.
-
DK Criteria: „Privacy shielding for PIN entry, EPC343-08, Version 1.4, 30.09.2009“
-
PCI Criteria: “Payment Card Industry (PCI) POS Transaction Security (PTS) Point of
Interaction (POI) Modular Detailed Test Procedures, PCI Security Standards Council
LLC, Version 3.1, August 2
011”
6.4.1.11 Notes of the printer stand
The machine must check the printer status before payment and transmit the value 0x04 of the
BMP 0x19 in bits to the terminal.
If the printer has a failure before the issue of the goods, the payment must be canceled by a
negative acknowledgment of the status of the payment record (an auto cancelation occurs). A
goods issue is not allowed.
If the printer has a failure after the issue of the goods, the machine must save the data and
retransmit it with the command receipt repetition if the printer is available again. Other
transactions may not be initiated until the printer is ready again, or they will be rejected by the
terminal.
6.4.1.12 Interpretation of interim state Information
The DK requirements to the second customer display must be observed with the
implementation of the interim status codes at the display texts at the display of the vending
machine.
„The terminal into which the base terminal `OPP-C´ is integrated, shall ensure at the second
customer display the display texts in accordance with Chapter of the Technical Annex. The
correct implementation of the specification `ERC interface ZVT-Protocol' from CCV
Deutschland GmbH must be guaranteed by the manufacturer.
The terminals send the text to be used in the TLV containers if the use is activated.
6.4.1.13 BMP 3C Formats
The use of BMP 3C by OPP-C is not coupled to the host system. Both formats (format 1 and
3) can be used for each host. The terminals ensure the conversion to the host interface.