OPM-C60/OPP-C60
System Manual
PA72P002_en
Edition: 40
Page 13 - 68
Product specific instructions
Confidential
© CCV GmbH - It is not allowed to duplicate or distribute this document without our agreement.
5.7.8 Contacted reader SCR-C
The SCR-C, SCR-C NB (new bezel) and SCR-C NBS (new bezel with shutter) is a hybrid card
reader for all common card types.
The integration into tank machines, vending machines as well as further machines in
connection with the outdoor-terminal OPP-B50 are the ideal fields of use. The SCR-C has
three LEDs for the communication with the user.
Following the technical data and interfaces of the SCR-C are described.
Notice
The SCR-C must be grounded by a grounding wire (min. diameter 2.5 mm²) at one of the four
mounting screws
In case of power disconnection or a software crash, the card can be pulled out of the reader
against resistance.
5.7.8.1 Certificates
The certificates for pollution control and waste prevention are also listed below.
•
ZKA TA 7.1 and DC POS 2.5
•
leant to the EVA-CVS specifications for unattended terminals
•
PCI 2.1 in connection with the OPP-B50 and PCI 3.1 with the OPP-C60 (expertise by
T-Systems)
•
EFT-POS C-TAP conform
•
PCI+ conform (Dutch domestic)
•
eft/pos 2000 conform
•
MasterCard TQM Label
•
EMVL1 Type Approval
•
EMVL2 Type Approval
•
CE-Approval
•
RoHS compliant
•
WEEE
5.7.8.2 Connection
Connection to OPP-C60 / OPM-C60 Connector: RJ45 8-poles, shielded
Pin
Signal
1
power in
2
GND
3
TxD (output)
4
RxD (input)
5
Not connected
6
Not connected
7
Wakeup
8
GND