CID110A/08062013
21 / 56
3.6
The use of payment cards
The way a cardholder should insert the payment card depends on the payment card.
A payment card with EMV chip must be inserted into
the chip card reader. The card must be inserted in the
card reader with the chip facing up and toward the
terminal.
A payment card with a magnetic strip must
be swiped through the magnetic card reader.
The card should be swiped through the
magnetic card reader with the magnetic strip
facing down and toward the terminal.
3.7
Placing a printing paper roll
Perform the actions below to place a new printing paper roll. Always do this carefully! The cut edge is
sharp and the printer may be hot.
1. Open the cover of the printer. This is done
by pulling back the printer knob and sliding
the printer cover backwards. If present,
remove the previous printing paper roll.
2. Place a printing paper roll as indicated in the
picture. Make sure that a part of the paper of
the roll sticks out and close the printer cover.
Now tear off the protruding paper along the
cut edge.
