45
[Figure 6-41. Motion Area Setup]
①
Select Motion Area of each channel.
②
It becomes the 1 channel division mode and rectangular boxes appear where motions occur. Drag
the yellow pixel cursor by using the mouse or the front button/remote controller and select pixels w
here motion detection doesn’t applied. The selected area turns brown.
③
Select Exit to finish.
(2) Motion Sensitivity : Lowest/Low/Middle/High/Highest.
(3) Sound Sensitivity : Lowest/Low/Middle/High/Highest
(4) Sensor Type : Select the sensor type.
(5)
EOL : EOL Function Select (On / Off).
.
６
-
２
-
５
Relay
Select the relay type.
６
-
３
Recording
The Main setup is to configure the environment of record and system and major functions.
In the real-time monitoring, move to
{Menu}
{Setup}
{Recording}
[Figure 6-42. Setup / Recording]
Summary of Contents for Cobra Elite 960H
Page 1: ...960H Ver 2 0 Elite ...
