9
960-Hour Time Lapse Video Cassette Recorder
8
960-Hour Time Lapse Video Cassette Recorder
Setting the Clock
Example: To set the clock to April 12, 2001 at 9:30
Clock Setting
1
Turn the power on to all devices used.
2
Press the MENU button, the initial MENU is displayed.
The arrow mark (
) is located in “VCR Mode Set”.
Initial MENU
3
Press the SHIFT
button, the VCR MODE SET
menu is displayed. The arrow mark (
) is located
in “Clock Set”.
4
Press the SHIFT
button, the CLOCK SET menu is
displayed.
5
Press the SET - (or +) button to set the hours (eg :
09), then press the SHIFT
button.
Video Cassettes Tapes
Use only video cassette tapes bearing the
logo.
This VCR was primarily designed for use with T-120
cassette tapes. It is recommended to use T-120 VHS video
cassette tapes for optimal performance.
Handling Cassette Tapes
Cassette tapes should always be stored vertically in their
cases, away from high temperatures, magnetic fields,
direct sunlight, dirt, dust and locations subject to mold
formation.
Do not tamper with the cassette mechanism.
Never touch the tape with your fingers.
Protect cassette tapes from shocks or strong vibrations.
To Protect your recordings
After having recorded a tape, if you wish to keep the
recording, use a flathead screwdriver to break off the
erasure-prevention tab on the cassette.
To record again on a tape without erasure-prevention tab,
cover the hole with adhesive tape.
Erasure-prevention tab
To prevent accidental erasure, remove the
tab after recording.
To record again, cover the hole with vinyl
tape.
Loading
Place the cassette, label
side up, in the loading
slot. Gently push the
center of the cassette
until it is loaded
automatically.
Unloading
In STOP mode, press the EJECT button. The cassette is
automatically ejected.
✔
• If you try to record on a
cassette without the erasure-
prevention tab, the VCR will
eject the cassette.
• If the TIMER button is
pressed when a cassette
without the erasure-
prevention tab is loaded,
the VCR will eject the
cassette, the timer recording
indicator (
) will start
flashing and a buzzer will
sound if “YES” is set in the
menu for buzzer.
TIME LAPSE RECORDER
CCTV IMPORTS
960 HR with 24 HOUR REAL TIME
✔
• When the cassette is
loaded, the cassette
indicator “
“ will light
on the display panel.
• The counter display will
switch to the reset counter
“0H 00M 00S” display on
the monitor screen. (“0H
00M” on the display
panel.)
✔
• Do not insert any object in
the cassette loading slot, as
that may cause injury and
damage to the VCR.
• If your hand gets stuck in
the cassette loading slot,
unplug the power cord and
consult the dealer where the
unit was bought. Do not
forcibly pull the hand out as
that may cause severe
injuries.
