CCS WattNode WNA-1P-240-FT10, User Manual

Page: 18 / 40

18 Network Configuration
3.3.2 Network Variable Summary
Variable Name Variable Type Default Description
Node Object (#0)
nviRequest SNVT_obj_request 0, normal Object request (object_id,request)
nvoStatus SNVT_obj_status Object status
nviTimeSet SNVT_time_stamp Time of day (yr,mn,dy,hr,mn,sec)
nvoAlarm SNVT_alarm WattNode alarms
nciStsMaxSendT SNVT_elapsed_tm 0 sec. Status update interval (dy,hr,mn,sec,ms)
Energy Measurement Object (#1)
nvoElecWH_f SNVT_elec_whr_f Energy (floating point watt-hours)
nvoElecKWH SNVT_elec_kwh Energy (0–65535 kilowatt-hours)
nvoEngyClrT SNVT_time_stamp Energy clear time (yr,mn,dy,hr,mn,sec)
nciGain SNVT_muldiv ?, 65535 Calibration value (multiplier, divisor)
nciCTAmps SNVT_amp 5.0 A CT rated current (0–3276.7 amps)
nciWHMaxSendT SNVT_elapsed_tm 5 sec. Time between energy updates: 0–18 hrs.
Power Measurement Object (#2)
nvoPower_f SNVT_power_f Instantaneous power (floating point watts)
nvoPowerW SNVT_power Instantaneous power (0–6553.5 W)
nvoPowerKW SNVT_power_kilo Instantaneous power (0–6553.5 KW)
nciWMaxSendT SNVT_elapsed_tm 10 sec. Maximum time between power updates: 0–
18 hrs. (dy,hr,mn,sec,ms)
nciWMinSendT SNVT_elapsed_tm 0 sec. Minimum time between power updates: 0–18
hrs. (dy,hr,mn,sec,ms)
nciWMinDelta SNVT_power_f 1.0e38 W Amount by which power must change to
force an output transmission
nciPowLimHi SNVT_power_f 1.0e38 W Power alarm high limit
nciPowLimLo SNVT_power_f 0.0 W Power alarm low limit
nciPowAlmSetT SNVT_elapsed_tm 0 sec. Power alarm set time: 0–18 hrs.
nciPowAlmClearT SNVT_elapsed_tm 0 sec. Power alarm clear time: 0–18 hrs.
nciPowLimHystHi SNVT_power_f 0.0 W Power alarm high hysteresis
nciPowLimHystLo SNVT_power_f 0.0 W Power alarm low hysteresis
nciPowAlarmInhT SNVT_elapsed_tm 0 sec. Initial power alarm inhibit time: 0–18 hrs
(dy,hr,mn,sec,ms)
Demand Measurement Object (#3)
nvoDemand_f SNVT_power_f Demand power (floating point watts)
nvoDemandW SNVT_power Demand power (0–6553.5 W)
nvoDemandKW SNVT_power_kilo Demand power (0–6553.5 KW)
nvoPkDemand_f SNVT_power_f Peak demand power
nvoPkDemandW SNVT_power Peak demand power (0–6553.5 W)
nvoPkDemandKW SNVT_power_kilo Peak demand power (0–6553.5 KW)
nvoPkDemResetT SNVT_time_stamp Peak demand reset time (dy,hr,mn,sec,ms)
nvoPeakDemT SNVT_time_stamp Peak demand time (dy,hr,mn,sec,ms)
nvoLoadControl SNVT_switch Demand alarm load control (on/off)
nciDemHiLim1 SNVT_power_f 1.0e38 Demand power alarm high limit 1
nciDemHiLim2 SNVT_power_f 1.0e38 Demand power alarm high limit 2
nciDemPeriod SNVT_elapsed_tm 15 min. Demand period: 1–720 min.
(dy,hr,mn,sec,ms)
nciDemSubints SNVT_count 1 Demand subintervals (1–15)