1
1
Important Information for Equipment Safety
INDEX
1.
Important Information for
Equipment Safety
2.
Names of Parts and Installation
3.
What You Can Achieve with
This Control Unit
4.
Manual Control
5.
Inputting an External Trigger
6.
Control with External Signals
7.
Signal Input Sequences
8.
Troubleshooting
9.
Optional Accessories
10.
Main Specifications
11.
Dimensions
Environmental Regulation
Warranty Information
Instruction Guide
Control Unit for LED Light Units
PD3-5024-3-PT
With Parallel Communications
Read before Use
Caution
The following symbols are used in this instruction guide to indicate and classify the
relative importance of warnings and cautions.
The following symbols in the instruction guide indicate and classify the precautions.
WARNING
WARNING
Indicates that incorrect
usage may result in
serious injury or death.
Caution
Indicates that incorrect
usage may result in injury
or property damage.
PROHIBITED
PROHIBITED
DISASSEMBLY
PROHIBITED
DISASSEMBLY
PROHIBITED
DO NOT TOUCH
WITH WET HANDS
DO NOT TOUCH
WITH WET HANDS
These symbols mean
the prohibited action.
This symbol indicates actions that
must be performed.
DO NOT SUBJECT
TO MOISTURE
DO NOT SUBJECT
TO MOISTURE
INSTRUCTED
INSTRUCTED
INSTRUCTED
This product has been designed with full consideration of safety. Incorrect
usage of the product may result in fire, electric shock, or other serious
damages. Observe the following precautions.
Do not touch the power cords during
lightning. This may result in electric shock.
Do not disassemble or modify the product.
Doing so may result in fire or electric shock.
Do not touch the plugs or switches with wet
hands. Doing so may result in electric shock.
Make sure that the product is free of
moisture or any liquid. Doing so may result
in fire or electric shock.
Before connecting or disconnecting cables,
make sure that the power source is turned
OFF. Not doing so may result in fire or
electric shock.
If abnormal condition occurs such as fuming,
heat, smell, noise, or so on, stop using the
product immediately, and turn off the power
source. A fire or electric shock may result if
the product is kept used.
Thank you for purchasing a CCS product.
To ensure proper use of the product,
please read this Instruction Guide before
use and keep it for your future reference.
This Control Unit is specifically designed to control the light intensity of CCS
LED Light Units. It is mainly used to control LED Light Units that are used for
machine vision and industrial inspections.
Features
One Control Unit can individually control three different Light Units.
The light intensity can be manually controlled with a dial on the front panel, or externally controlled
using a PLC or machine vision equipment.
PWM control is used to control the light intensity at a frequency of 125 kHz.
Data can be written in high-speed with parallel external control.
External trigger inputs can be used to turn lights ON or OFF, or to strobe lights.
The Control Unit can be used for CCS LED Light Units with a voltage of 24 V and a
power consumption of up to 48 W.
The total power consumption of the connected Light Units must be 48 W or less.
24V DC IN
+ -
PROHIBITED
PROHIBITED
INSTRUCTED
PROHIBITED
PROHIBITED
INSTRUCTED
PROHIBITED
INSTRUCTED
INSTRUCTED
INSTRUCTED
INSTRUCTED
PROHIBITED
Do not use user-made branch cables. Doing
so may cause product failure.
Do not place the product in direct sunlight or
in a high-humidity environment. Doing so
may result in fire due to internal temperature
rise.
Always place the product on a stable and flat
location. Doing so may result in the product
falling or toppling, which may cause
malfunction, accidents, or bodily injury.
Do not bend cables or jam them between
objects when wiring. Doing so may cause
product failure.
Do not drop the product or subject it to
impact. Doing so may cause product failure.
Do not connect any Light Units other than
CCS LED Light Units. Doing so may cause
overcurrent and the device may overheat or
ignite.
Do not bundle product cables with
high-voltage lines or power lines.
Allow leeway when installing the cables.
Use Light Units that are suitable for the
product ratings. Exceeding the ratings may
cause product failure.
Use a standard Extension Cable that is
manufactured by CCS. However, if the
cable is too long, the light intensity will
decrease due to the DC resistance of the
cable.
Always hold onto the plug or connector
when disconnecting the cables. Pulling on
the cable may damage the cable and result
in fire or electric shock.
Before moving the product, disconnect all
connection cables. Damaging the cables
may result in fire or electric shock.
When mounting products in system racks or
cases, do not insert the screws more than
5 mm. Doing so may cause short-circuits in
internal components.
PROHIBITED
PROHIBITED
PROHIBITED
INSTRUCTED
Do not intentionally short-circuit the positive
and negative output terminals.
Do not wipe the product with volatiles such
as paint thinner or benzene. Discoloration or
deterioration of the product surfaces may
occur.
Be sure to use the product within the range
of input voltage. Applying the voltage beyond
the range may cause product failure.
Use a dry cloth to remove dust or other
foreign matter from the electrodes. Failure to
do so may result in fire.
5
1
2
2
3
3
4
5
6
6
6
6
6
