8/7/2018
Rev. 1.0
16
Tower Series PIM Analyzer Remote
Operation User Guide
3.1.9.1.1 Change Frequencies
The F1 and F2 frequencies can be changed as on the Tower Series PiMPro itself. Pressing the
associated frequency for F1 and F2 (see the highlighted area in figure 7) will open up the pop-up
window to enter the new F1 or F2 frequency. See
figure 10
below for the TX-1 (or TX-2) pop-up
window.
If the user attempts to set a frequency outside the allowable range, a “Frequency out of
Range” pop-up window appears (as seen in
figure 11
) and also indicates “Please Try Again.”
Figure 10
– TX-1 Frequency Setting Pop-up Window
Figure 11
– “Frequency out Of Range” Pop-up Window
